Video
1 / 5
Options:
Model No. : | APX1 |
---|---|
Brand Name : | daruifuno |
Accuracy : | ±0.02pH / ±2mV |
Suzhou, Jiangsu, China
Produktbeskrivning
APX1 -serien PH ORP -analysator som produceras av Delfino kan anslutas till en mängd analog pH/T- eller ORP -kompositensorer. Den industriella ph orp -analysatorn uppfyller inte bara funktionerna för kontinuerlig mätning och display, utan kan också realisera signalutgång och kontrollfunktioner. Det finns en mängd olika utgångskonfigurationer att välja mellan för att tillgodose de olika behoven av låg kostnad och hög prestanda. Våra ph/orp -mätare är av hög kvalitet, med rika funktioner för att förbättra användarupplevelsen. Det kan anslutas till analog pH -sensor och ORP -sensor, lämplig för olika miljö- eller industriella miljöer. Om du behöver alternativ, vänligen kontakta oss.
Funktioner i pH ORP -styrenhet
Specifikation av ph orp -kontroller
Model | online pH/ORP controller | APX1-C1 | APX1-C1Z | APX1-C2 | APX1-G2 |
Measurements | PH or ORP | PH or ORP | |||
Measuring Range | pH Range | 0~14pH | |||
ORP Range | ±2000mV | ||||
Temp. Range | -20~150℃ | ||||
Solution Grounded | Differential Signal | N/A | N/A | N/A | √ |
Resolution | pH | 0.01pH | |||
ORP | 1mV | ||||
Temp | 0.1℃ | ||||
Temp. Compensation | Automatic or Manual | Automatic (NTC10K/PT1000) or manual | |||
Converted to 25℃ | N/A | N/A | N/A | √ | |
Accuracy | 0.1% of measuring range or PH: ±0.02pH /ORP: ±2mV, take the larger one | ||||
Stability | 0.05% of measuring range per 24 hours, no accumulation | ||||
Repeatability | Better than 0.1% of the measuring range | ||||
Display Screen | 3.2 inch LCDscreen | ||||
System Language | English | English | English | English/Chinese | |
Calibration Method | pH calibration | 3 points | 3 points | 3 points | 3 points and 5 points |
ORP calibration | 2 points | 2 points | 2 points | 2 points | |
Power Failure Protection | The instrument is powered off,the data is permanently retained | ||||
Password | Management of operating authority, six-digit password setting | ||||
Quick Calibration | Provide a quick calibration menu to operate calibration | ||||
Relay Output | SPST Relays | SPST relay can be set, the maximum load is 3A/250VAC | |||
Setting Objects | high/low alarms, water temperature or wash control | ||||
Current Output |
0/4~20mA active current long-term calibration |
A current output, Load 1000Ω | Two current output, Load 1000Ω | ||
Digital Output | RS485 MODBUS RTU | N/A | √ | √ | √ |
JSON | N/A | N/A | N/A | √ | |
Protection Grade | IP66 | ||||
Working Temperature | 0~60℃, relative humidity less than 95%RH (no condensation) | ||||
Storage Temperature | -20~70℃, relative humidity less than 55%RH (no condensation) | ||||
Dimension | 100*100*120mm | ||||
Material | Enhanced ABS | ||||
Installation Method | Cabinet panel installation | ||||
Electrical Interface | Three M12*1.5 Glen heads are reserved, wire diameter 3~6.5mm | ||||
Power Supply | AC:100~240V, 50~60Hz;DC:18~36V | ||||
Power Consumption | 3W MAX |
Video
Suzhou, Jiangsu, China
Skicka din förfrågan till denna leverantör