1 / 2
Model No. : | DL-1818N-GGCU-R |
---|---|
Usage : | Communication Antenna |
Shenzhen, Guangdong, China
Produktbeskrivning
The GPS Module with u-blox UBX-M8030-KT chip series is a family of stand alone GNSS receivers featuring the high performance
u-blox M8 positioning engine.
The module is equipped with a 5-pin pad that connects to your application platform. The DL-1818N-GGCU-R module It consists of a u-blox
M8 single chip GNSS IC which includes the RF part and Baseband part, a patch antenna, a LNA, a SAW filter, a TCXO, a crystal oscillator.
View Features
n Build on high performance, low-power u-blox UBX-M8030-KT chip set
n Ultra high sensitivity: -167dBm
n Extremely fast TTFF at low signal level
n Built in high gain LNA
n Low power consumption:Max40mA/3.3V
n NMEA-0183 compliant protocol or custom prot ocol
n Operating voltage: 2.8V--3.6V
n Operating temperature range:-40to85℃
n Patch Antenna Size: 18mmx18mmx4mm
n Small form factor: 18.1x18.1x6.4mm
n Communication type: UART/TTL
n RoHS compliant (Lead-free)
Key Features
Parameter Specification
Receiver Type Code 72 search channels ,22 synchronous tracking channels
GPS&QZSS L1 1575.42MHz C/A , Beidou B1 1561.098MHz,
GALILEO E1B/C1, GLONASS L1OF 1602MHz,
SBAS: WAAS, EGNOS, MSAS, GAGAN
TTFF (Autonomous) Cold start: 35s typ @-130dBm Warm start: 30s typ @-130dBm
Hot start : 1s typ @-130dBm
Horizontal Position <2.5m CEP @-130 dBm
Accuracy (Autonomous)
Max Update Rate Up to 10Hz,1Hz by fault
Accuracy of 1PPS Signal not enabled
Acceleration Accuracy Without aid: 0.1m/s²
Dynamic Performance Maximum altitude: 18,000m
Maximum velocity: 515m/s
Acceleration: 4G
Supports baud rate from 4800bps to 115200bps, 9600bps by def
UART port for NMEA and UBX output, binary or ublox proper agreement input
Shenzhen, Guangdong, China
Skicka din förfrågan till denna leverantör