for building SBS modified bitumen waterproof membrane
The SBS modified bituinous waterproof membrane is polymer modified asphalt waterproofing material.It is made by dipping the base(long fiber polyester fiber) in the SBS(Styrene Butadiene Styrene) modified bitumen,then covering double faces with SBS modified bitumen,and last finishing the upward face with fine sand,mineral flakes,PE film or aluminium foil,while downward face with fine sand or PE film.
Specification:
Thickness
|
2mm/3mm/4mm/5mm
|
Top surface
|
PE film /Aluminum foil /Sand /Mineral flakes
|
Base reinforcement
|
Polyester mat /Fiberglass compound base
|
Width
|
100cm
|
Length
|
7.5m/10 per roll
|
Advantage:
- Good waterproofing performance,conforms to the national standards
- High tensile strength,good elongation rate,stable performance and reliable quality,can be well suited to the substrate distortion and crack
- Weather-resistance,good flexibility at low temperature.The SBS modified bitumen waterproof membrane is specially used in cold area.
- Puncture-resistance,chemical resistance,anti-corrosion,tear resistance and good wear-resisting property
- Torch application,easy to construction without seasonal restrictions
Applicable Scope:
The SBS modified bituminous waterproofing membrane is widely uesd in waterproof and damp-proof application.
- Construction project:upper and bottom of building foundation, basement,roof garden,garage
- Traffic Project:highway,railway,bridge,tunnel,etc.
- Other projects of water seepage:pool,park,etc.
- Single layer system or double layer system.
- Clean up the base before the construction,make sure the base course clean,soild,smooth and no water.
- Don't work in rainy,windy or snowy days.
- The construction site should have some equipments for fire controls.
Construction points:
- Keep the substrate clean,dry,smooth,firm dustless and greaseless
- Base treatment of the working face:Mix coating materials uniformly first,then dilute the mixture with 5-10% solvent to and then brush the base with it.
- Mix the component A and B evenly at the ratio of 1:2 when applying with rubber scrapes or plastic scrapers.Make sure the total coating film is 1.5mm-2.0mm,and brush for 2-3 times.
- Charge mixture is supposed to be used up within 20 minutes under normal temperature
- Internal & external corners and junctures of pipes could be reinforced through non-woven fabrics.
- The products should be sealed storage in ventilated and shade place.Keep away from fire.Prevent sun and rain during transportation.
- It must be stored in cool ,dry and venytilated space
- Avoid raining,insolating,squeezing and colliding during transportation to save the packaging.
Choice-Link offers a range of high quality waterproofing solution-based products especially foe the prefessional .Our main products including:
- SBS/APP modified bitumen waterproofing membranes
- Self adhesive bitumen waterproofing membranes
- Self adhesive bitumen flashing tape
- Self adhesive butyl waterproofing tape
- PVC/TPO/HDPE/EVA waterproofing membranes
- Polymer compound waterproofing membranes
- Liquid bitumen coating
- Dimple drainage board
Our company also export Dimple drainage board, Non woven polyester mat and Glassfiber mesh compound mat for bitumen membranes,Glassfiber mesh,Modified bitumen membrane production lines,etc.
----------------------------------------------------------------------------------