1 / 1
Brand Name : | maxmach |
---|
Hangzhou, Zhejiang, China
Produktbeskrivning
Huvud Teknisk Parameter för stående sömnad takpanel arkvalsformningsmaskin
No |
Item |
Parameter |
Remark |
|
1 |
Suitable
Material |
Type |
Color coated steel |
|
Width(mm) |
1000 |
|
||
Thickness(mm) |
0.4-0.7 |
|
||
Yield strength(MPA) |
230-300 |
|
||
Coil capacity(T) |
5 |
|
||
2 |
Forming Speed(m/min) |
About 18 |
According to actual design |
|
3 |
Roller Material |
No.45 steel |
with hard chrome painted. |
|
4 |
Cutting Model |
Hydraulic cutting |
|
|
5 |
Power source |
Type |
380V/3PH/60HZ |
|
Main motor power(KW) |
4.4 |
According to actual design |
||
Total power(KW) |
7 |
According to actual design |
||
6 |
Machinery Dimension |
See layout |
|
Maskinkomponenter för plattformsmaskin för stående sömmpanel
No |
Name |
Qt |
Description |
|
1 |
decoiler information (capacity: 5t) |
1 set |
Structure: Arm-type Expanding model: hydraulic Releasing model: passively |
|
2 |
Main
machine |
Guiding device |
1 set |
|
Roll forming system |
1 set |
Roller inner supporting structure : guide colum |
||
Post cutting device |
1 set |
Cutting blade material: Cr12 quenched treatment |
||
3 |
Supporting table |
2pcs |
Dimension: 2*2m |
|
4 |
PLC control system |
1 set |
1.Operation: screen+ button 2..MITSUBISH, Frequency |
|
5 |
Hydraulic station |
1 set |
1Famouse Chinese brand 2. Will be displayed inside of the machine. |
Komponenter detaljer för plattformsmaskin för stående sömm takpanel
Decoiler: 1)Machine frame :welding structure with shot blasting treatment 2)Description: Put the coil to the mandrel, the hydraulic cylinder will tighten the coil. Start the machine, the hydraulic motor will drive the mandrel at first, then the steel sheet will be released. Take the sheet to the forming rollers and it will move automatically while the rollers run. 3)The light control is used to adjust the speed of releasing . |
Guiding device: Adopting guiding bar and sliding block to control the width and position of the steel sheet. The sheet is guided in the correct position and runs to the roll forming equipment.
|
Roll Forming System: 1)Machine frame: welding structure with blasting treatment 2)The roller is made by high quality no.45 steel with hard chrome-painted 3) Roller inner supporting structure type: guiding column 4) Planetary gear speed reducer motor driven, back/forward roller driven by chain, part of upper/lower rollers driven by gear. 5) Adjust the screw bar manually to adjust the distance between upper/lower rollers for different thickness of sheet. Other remark: |
Cutting Device: 1) The cutting blade material is Cr12 with quenched treatment, there is no material wasted. 2) The power of cutting is provided by motor |
Supporting Table: To support the finished panels. The quantity we supply is 2 pieces with length 2000mm, |
Electrical Control System: With PLC control and frequency speed adjusting technology to realize the automatic production.1.System provide good interface machine screen to set the batches, plate length, and quantities. 2.Encoder calculation with the function of calculation and length measuring. |
Hydraulic Station: 1.Provide power to tiling and cutting 2.Adopts separated hydraulic station 3. Main valve adopts China brand. |
Förpackning och frakt
Mer om Maxmach-gruppen
Hangzhou, Zhejiang, China
Skicka din förfrågan till denna leverantör