Koppar-Nickel rör och rör ASTM B111 C70600
Koppar-Nickel rör och rör ASTM B111 C70600
Koppar-Nickel rör och rör ASTM B111 C70600
Koppar-Nickel rör och rör ASTM B111 C70600
Koppar-Nickel rör och rör ASTM B111 C70600
Koppar-Nickel rör och rör ASTM B111 C70600
Koppar-Nickel rör och rör ASTM B111 C70600
Koppar-Nickel rör och rör ASTM B111 C70600
Koppar-Nickel rör och rör ASTM B111 C70600
Koppar-Nickel rör och rör ASTM B111 C70600
Koppar-Nickel rör och rör ASTM B111 C70600
Koppar-Nickel rör och rör ASTM B111 C70600

1 / 5

Koppar-Nickel rör och rör ASTM B111 C70600

Få Senaste Pris
Skicka förfrågan
Model No. : Copper Nickel Pipes and Tubes ASTM B111 C70600
Brand Name : MISSNÖJD
9yrs

Ningbo, Zhejiang, China

Besök butiken
  • Guldleverantör
  • Online Expo

Produktbeskrivning

Detaljerad produktbeskrivning


Copper Nickel Pipes and Tubes | Cupro Nickel Pipes and Tubes
Cupro Nickel Tubes 90/10
This form of cupro nickel tubes produced by Tube Tech possess excellent resistance to corrosion by sea water as well as high resistance to erosion corrosion and air-impingement attack. The addition of iron results in 90/10 performing as good as 70/30 in salt water service heat exchangers. These tubes have good strength and ductility at ordinary temperatures and relatively high strength and other mechanical properties at elevated temperatures.
These cupro nickel tubes are widely used in condensers, coolers and heat exchangers where resistance to corrosion and erosion is paramount, yet maintaining a high thermal conductivity rate. To be used preferably in marine conditions. Forms a protective film which is multi-layered in flowing seawater. Resists marine bifouling.
These cupro nickel tubes are produced in a range of outside diameter, wall thickness various temper conditions to achieve the required mechanical properties and grain size. The mechanical and dimensional characteristics of our products satisfy the most demanding orders that require tight tolerances.
Cupro Nickel Tubes 70/30
Prosaic Steel supplies smooth bore 70/30 cupro nickel tubes of the highest standard, rigorously tested to make sure they are suitable for the exacting requirement of condensers and heat exchangers. These cupro nickel tubes have the highest resistance to stress-corrosion cracking. These tubes are available in a variety of outside diameter, wall thickness and tempers to meet the requirement. Superior dimensional control with specified mechanical properties offers trouble free performance and cost saving.

This form of cupro nickel tube gives the best service life under the most adverse conditions because of improved corrosion resistance and almost insensitive to stress corrosion. These cupro nickel tubes are used in heat exchangers where severe erosion and corrosion have been experienced, especially at elevated temperatures, high velocities and extreme turbulence of the circulating media. These cupro nickel tubes have an important bearing not only on the performance of heat exchangers but also on the cost and delivery cycle time of the condenser and heat exchangers where they are used.
Copper Nickel Pipes and Tubes , Cupro Nickel Pipes and Tubes ASTM B111 C70400 C70600,ASTM B288, ASTM B688 .


Standards

Cupro Nickel Tube90/ 10

Standard

BS2871part3

ASTM B-111

IS 1545

JIS H 3300

NFA 51 102

Symbol

CN 102

C 70600

CuNi10Fe1

C7060

CuNi10Fe1Mn

Cupro Nickel Tubes 70/30

Standard

BS2871part3

ASTM B-111

IS 1545

JIS H 3300

NFA 51 102

NFA 51 102

CN 107

C 71500

CuNi30Mn1Fe

C 7150

CuNi30Mn1Fe


Dimensionell intervall
Yttre Diameter - 4.00 till 22.00 mm
Väggtjocklek - mellan 0,15 mm och 1,50 mm
Längd upp till 6 MTR
Avsluta program

Värmeväxlare, Oljekylare, radiatorer, hög kapacitet kraftverk, skeppsbygge & fartygsreparationer, kondensorer, olje riggar, Distiller Tubes, förångare, Ferrules etc.

Cupro Nickel rör 90/10 för värmeväxlare och kondensorer

Dessa Cupro Nickel rör & rör för värmeväxlare och kondensorer är mycket viktiga för alla industriella områden. Företaget har erfarenhet inom dessa områden och kan leverera dessa rör i enlighet med de flesta internationella standarder och speciella kundkrav.
Cupro Nickel rör 90/10 för bil industrier

Flytten till Koppar-Nickel rör
Koppar hade bevisats sedan tidiga dagar att ha många bra egenskaper. Det var lätt att böja och hade mycket hög korrosionsbeständighet, men det fanns oro för dess låg korrosion-utmattningshållfasthet. När koppar-nickel introducerades det visas korrosionsbeständighet liknande koppar, högre allmänna styrka och bättre utmattningshållfasthet. God formbarhet tillåter enkel fackling och böjning, och även metall kostnaden är större än för stål alternativ, koppar-nickel är mycket attraktiv med tanke på dess extra liv, problemfri installation och säkerhet/tillförlitlighet egenskaper.
Egenskaper av koppar-Nickel broms slangar
Koppar-nickel legering används för broms slangar vanligtvis innehåller 10% nickel, med järn och mangan tillägg av 1,4% och 0,8% respektive. Produkten överensstämmer med ASTM B466 (American Society for Testing and Materials), vilket anger dimensioner, brottgräns och sträckgräns. Formbarhet och inre renlighet överensstämmer med specifikationerna SAE J527, ASTM A254 och SMMT C5B (Society of motortillverkare och handlare). Dessutom uppfyller legeringen för trycket inneslutning, tillverkning och korrosion motstånd för ISO 4038 (International Standards Organization) och SAE J1047.

Skicka förfrågan

Produktvarning

Prenumerera på dina intresserade nyckelord. Vi skickar fritt de senaste och hetaste produkterna till din inkorg. Missa inte någon handelsinformation.